The defoamer ZeroFoam RC109 is a water emulsion based on fatty alcohol.
Appearance | Viscous, White (milk like) |
Density | ~0.96 |
Viscosity, dynamic | 250 mPa-s |
Defoamer ZeroFoam RC109 is recommended to cure the foaming problems in aqueous media. It can be used in various processes such as:
· Pulp and Paper Industry
· Waste water treatment
Treatment should be followed by a rinsing step by drinkable water thus may remain technically unavoidable presence of processing aid in the final product.
Our technical team is at your disposal to optimize the point of introduction and dosage. In general, it is advisable to use it at 50 to 100 ppm.
It can be implemented continuously or locally, either manually operated or by metering pump.
Before use, it is recommended to read the safety data sheet.
Store in dry, cool, well-ventilated area.
Shelf-life storage: 6 months. After a long storage time a little phase displacement could appear. Original
properties could be recovered by simple mixing.
· Bulk
· Container of 1000 liters
· Drums of 200 liters
· Can of 25 liters